Golf Balls come in an array of different dimple patterns, multiple layer constructions, and compressions. What does this refer to and how do you pick the perfect golf ball for your game?
Specifications of a golf ball
What a lot of people don't realize is that golf balls have no maximum size as well as minimum weight. Producing a golf ball that could be made to go so much further than a regular golf ball is possible through modifying its characteristics, size, and weight.
All officially authorized golf ball s are now made based on USGA specifications to make it fair for all those who play golf:
The ball should be spherically proportion. It should be round.
The total distance of the ball must not go beyond a particular distance when tried in particular conditions on official device.
The ball's weight should not be more than 1.620 ounces.
The ball's diameter should not be lower than 1.680 inches.
The primary speed of the golf ball must not go over a particular limit, when quantified on official testing device.
So, what can be carried out in order to make the ball unique and give off well-defined results for your game, considering these standard specifications imposed on the ball?
1. The ball's compression
The hardness or compression a golf ball pertains to how simple it is to compress the ball on impact plus make the ball to gather speed off the club. A high compression rate is harder while the low rate of compression is softer.
In other words, if the ball is very soft, you will not be able to obtain as much launch velocity as that of a harder ball. A ball that is very hard will not sufficiently compress and will not launch at best possible speed.
2. The dimples
The ball's dimples are designed to produce drag while the ball is flying through the air. The drag makes aerodynamic lift while the golf ball spins. It also makes the ball stay longer in the air than a perfectly smooth ball would go. Makers of golf balls adjust the number of dimples and pattern to enhance the distance and route of the ball.
3. The ball's multi-layer composition
In the past, the wound core of the golf balls is made of elastic. These were quite soft and easy to manage with the spin that can easily be imparted on them. By the year 1966 the first ever hard one-piece golf ball was made. These were discovered to soar much further; however, they were harder to manage on shorter shots.
What was looked-for then was a mix of the two to achieve the distance of the hard one piece ball and the soft wound ball's feel. This is how the multi-layer ball were made.
A multi-layer golf ball has a soft surface layer to provide a good feel on shorter shots, and a hard core to produce distance and ball velocity. Golf balls now ranges from two to four piece balls.
Sean Matthews has been playing golf for about 5 years. His current best score is 78. For more golf tips, visit his blog at http://www.seanmatthewsgolf.com Check it out today!
Article Source: http://EzineArticles.com/?expert=Sean_Matthews
No comments:
Post a Comment